MueLu_GeneralGeometricPFactory_decl.hpp

Go to the documentation of this file.

// @HEADER
//
// ***********************************************************************
//
//        MueLu: A package for multigrid based preconditioning
//                  Copyright 2012 Sandia Corporation
//
// Under the terms of Contract DE-AC04-94AL85000 with Sandia Corporation,
// the U.S. Government retains certain rights in this software.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the Corporation nor the names of the
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Questions? Contact
//                    Jonathan Hu       (jhu@sandia.gov)
//                    Andrey Prokopenko (aprokop@sandia.gov)
//                    Ray Tuminaro      (rstumin@sandia.gov)
//
// ***********************************************************************
//
// @HEADER
#ifndef MUELU_GENERALGEOMETRICPFACTORY_DECL_HPP
#define MUELU_GENERALGEOMETRICPFACTORY_DECL_HPP
 
#include <Teuchos_SerialDenseVector.hpp>
 
#include <Xpetra_MultiVector.hpp>
#include <Xpetra_Matrix_fwd.hpp>
 
#include "MueLu_ConfigDefs.hpp"
#include "MueLu_PFactory.hpp"
#include "MueLu_GeneralGeometricPFactory_fwd.hpp"
 
#include "MueLu_Level_fwd.hpp"
 
namespace MueLuTests {
  // Forward declaration of friend tester class used to UnitTest GeneralGeometricPFactory
  template <class Scalar, class LocalOrdinal, class GlobalOrdinal, class Node>
  class GeneralGeometricPFactoryTester;
}
 
namespace MueLu {
 
  template <class Scalar = double, class LocalOrdinal = int, class GlobalOrdinal = LocalOrdinal, class Node = KokkosClassic::DefaultNode::DefaultNodeType>
  class GeneralGeometricPFactory : public PFactory {
#undef MUELU_GENERALGEOMETRICPFACTORY_SHORT
#include "MueLu_UseShortNames.hpp"
 
  public:
 
    friend class MueLuTests::GeneralGeometricPFactoryTester<Scalar,LocalOrdinal,GlobalOrdinal,Node>;
 
 
 
    GeneralGeometricPFactory() { }
 
    virtual ~GeneralGeometricPFactory() { }
 
    RCP<const ParameterList> GetValidParameterList() const;
 
 
 
    void DeclareInput(Level& fineLevel, Level& coarseLevel) const;
 
 
 
 
    void Build (Level& fineLevel, Level& coarseLevel) const;
    void BuildP(Level& fineLevel, Level& coarseLevel) const;
 
 
  private:
    struct GeometricData {
      // Geometric algorithm require a copious amount of data to be passed around so this struct
      // will reduce the amount of input/output parameters of methods in the class. Additionally
      // the struct can be rewritten to accomodate constraints of Kokkos/CUDA data types
 
      std::string meshLayout = "Global Lexicographic";
      int numDimensions;
      LO lNumFineNodes = -1, lNumCoarseNodes = -1, lNumGhostNodes = -1,lNumGhostedNodes  = -1;
      LO myBlock = -1, numBlocks = -1, lNumFineNodes10 = -1;
      GO gNumFineNodes = -1, gNumCoarseNodes = -1, gNumFineNodes10 = -1, minGlobalIndex = -1;
      Array<int> coarseRate, endRate;
      Array<LO> lFineNodesPerDir, lCoarseNodesPerDir, offsets, ghostedCoarseNodesPerDir;
      Array<GO> startIndices, gFineNodesPerDir, gCoarseNodesPerDir, startGhostedCoarseNode;
      std::vector<std::vector<GO> > meshData; // These are sorted later so they are in std::vector
      bool ghostInterface[6] = {false};
 
      GeometricData() {
        coarseRate.resize(3);
        endRate.resize(3);
        lFineNodesPerDir.resize(3);
        lCoarseNodesPerDir.resize(3);
        offsets.resize(6);
        ghostedCoarseNodesPerDir.resize(3);
        startIndices.resize(6);
        gFineNodesPerDir.resize(3);
        gCoarseNodesPerDir.resize(3);
        startGhostedCoarseNode.resize(3);
      }
    };
 
    struct NodesIDs {
      // This small struct just carries basic data associated with coarse nodes that is needed
      // to compute colMapP and to fillComplete P,
 
      Array<GO>  GIDs, coarseGIDs;
      Array<int> PIDs;
      Array<LO>  LIDs;
      std::vector<GO> colInds;
    };
 
    struct NodeID {
      // This small struct is similar to the one above but only for one node.
      // It is used to create a vector of NodeID that can easily be sorted
 
      GO  GID;
      int PID;
      LO  LID, lexiInd;
    };
 
    void MeshLayoutInterface(const int interpolationOrder, const LO blkSize,
                             RCP<const Map> fineCoordsMap, RCP<GeometricData> myGeometry,
                             RCP<NodesIDs> ghostedCoarseNodes,
                             Array<Array<GO> >& lCoarseNodesGIDs) const;
 
    void GetCoarsePoints(const int interpolationOrder, const LO blkSize,
                         RCP<const Map> fineCoordsMap, RCP<GeometricData> myGeometry,
                         RCP<NodesIDs> ghostedCoarseNodes,
                         Array<Array<GO> >& lCoarseNodesGIDs) const;
 
    void MakeGeneralGeometricP(RCP<GeometricData> myGeo,
                               const RCP<Xpetra::MultiVector<double,LO,GO,NO> >& fCoords,
                               const LO nnzP, const LO dofsPerNode,
                               RCP<const Map>& stridedDomainMapP,
                               RCP<Matrix> & Amat, RCP<Matrix>& P,
                               RCP<Xpetra::MultiVector<double,LO,GO,NO> >& cCoords,
                               RCP<NodesIDs> ghostedCoarseNodes, Array<Array<GO> > coarseNodesGIDs,
                               int interpolationOrder) const;
 
    void ComputeStencil(const LO numDimension, const Array<GO> currentNodeIndices,
                        const Array<GO> coarseNodeIndices, const LO rate[3],
                        const Array<Array<double> > coord, const int interpolationOrder,
                        std::vector<double>& stencil) const;
 
    void ComputeConstantInterpolationStencil(const LO numDimension,
                                             const Array<GO> currentNodeIndices,
                                             const Array<GO> coarseNodeIndices,
                                             const LO rate[3], std::vector<double>& stencil) const;
 
    void ComputeLinearInterpolationStencil(const LO numDimension, const Array<Array<double> > coord,
                                           std::vector<double>& stencil) const;
    void GetInterpolationFunctions(const LO numDimension,
                                   const Teuchos::SerialDenseVector<LO,double> parameters,
                                   double functions[4][8]) const;
 
    void sh_sort_permute(
                const typename Teuchos::Array<LocalOrdinal>::iterator& first1,
                const typename Teuchos::Array<LocalOrdinal>::iterator& last1,
                const typename Teuchos::Array<LocalOrdinal>::iterator& first2,
                const typename Teuchos::Array<LocalOrdinal>::iterator& last2) const;
 
    void sh_sort2(
                const typename Teuchos::Array<LocalOrdinal>::iterator& first1,
                const typename Teuchos::Array<LocalOrdinal>::iterator& last1,
                const typename Teuchos::Array<LocalOrdinal>::iterator& first2,
                const typename Teuchos::Array<LocalOrdinal>::iterator& last2) const;
 
    void GetGIDLocalLexicographic(const GO i, const GO j, const GO k,
                                  const Array<LO> coarseNodeFineIndices,
                                  const RCP<GeometricData> myGeo, const LO myRankIndex, const LO pi,
                                  const LO pj, const LO pk,
                                  const typename std::vector<std::vector<GO> >::iterator blockStart,
                                  const typename std::vector<std::vector<GO> >::iterator blockEnd,
                                  GO& myGID, LO& myPID, LO& myLID) const;
 
  }; //class GeneralGeometricPFactory
 
} //namespace MueLu
 
#define MUELU_GENERALGEOMETRICPFACTORY_SHORT
#endif // MUELU_GENERALGEOMETRICPFACTORY_DECL_HPP